Table Shuffleboard Refinishing


Table Shuffleboard Refinishing Tips from Ron Kaintz

Ron Kaintz is one of the most experienced shuffleboard refinishers in the world having refinished over 1,000 boards in his career. Here are some of his tips:

  1. Ron uses a 18 inch round floor sander to sand the board.
  2. Ron uses a solid metal level to make sure the board is perfectly flat – using the level to measure both length wise and width wise. If you can fit a sheet of paper under the level, it doesn’t pass Ron’s inspection.
  3. Ron recreates the lines and numbers on the board with a carpenter’s pencil — the lines get darker as the new finish is applied.
  4. Ron seals the board with a sealer – twice – waiting hours between coats. He finishes the table with a polyurethane and buffs a paste or liquid wax 24 hours after finishing.

Want More Refinishing Tips? See our page at http://www.zieglerworld.com/shuffleboard-refinishing-tips.htm