Here is How to Level your Shuffleboard Table


Table Shuffleboard Leveling – Convex Table

Convex Table Adjustment (Hump)
To Adjust Convex (Hump)
Loosen Nut B all the way on both sides.
Tighten Nut A SLOWLY – a couple turns. Do the same to each side for uniform effect.
Repeat process a few times, as necessary, allowing time in between (days) for change to fully take effect.

Table Shuffleboard Leveling – Concave Table

Concave Table Adjustment (Dip)
To Adjust Concave (Dip)
Loosen Nut A all the way on both sides.
Tighten Nut B SLOWLY – a couple turns. Do the same to each side for uniform effect.
Repeat process a few times, as necessary, allowing time in between days) for change to fully take effect.
Keep this in mind while adjusting your table
If you had to adjust some of the legs more than one full turn you will likely have to adjust the warp again.

Once your table is properly adjusted you should only need to make small adjustments about once a month.